02-nov-10 dcdc specification 2 watt ? single & dual output ? sip package ? industry standard pinout ? 6000 vdc isolation ? 40 c to +85 c operation ? mtbf >3.5 mhrs ? 3 year warranty ig series input input voltage range ? nominal 10% input reverse voltage ? none protection output output voltage ? see table minimum load ? 10% line regulation ? 1.2%/1% ? vin load regulation ? 15% for a 10-100% load change setpoint accuracy ? 100-110% of nominal at 10% load ripple & noise ? 250 mv pk-pk 20 mhz bandwidth temperature coefficient ? 0.03%/c short circuit protection ? continuous general efficiency ? see table isolation voltage ? 6000 vdc (tested for 1 min) isolation resistance ? 10 9 isolation capacitance ? 10 pf max switching frequency ? 5 v input: 45 khz, 12 v/24 v input: 50 khz typical at nominal input, full load mtbf ? >3.5 mhrs to mil-hdbk-217f at 25 c, gb environmental operating temperature ? -40 c to +85 c storage temperature ? -55 c to +125 c case temperature ? 105 c max cooling ? convection-cooled xppower.com input voltage output voltage output current efficiency (typ) model number (1) 5 vdc 5.0 v 400 ma 74% IG0505SA 9.0 v 222 ma 77% ig0509sa 12.0 v 167 ma 77% ig0512sa 15.0 v 133 ma 77% ig0515sa 12 vdc 5.0 v 400 ma 75% ig1205sa 9.0 v 222 ma 78% ig1209sa 12.0 v 167 ma 80% ig1212sa 15.0 v 133 ma 78% ig1215sa 24 vdc 5.0 v 400 ma 75% ig2405sa 9.0 v 222 ma 77% ig2409sa 12.0 v 167 ma 80% ig2412sa 15.0 v 133 ma 79% ig2415sa mechanical details 0.10 (2.50) 0.079 (2.00) 1567 2 bottom view 0.38 (9.80) side view 0.49 (12.50) 0.77 (19.50) 0.1 (2.54) 0.02 (0.50) 0.161 (4.10) dual output 12 5 7 6 single output 12 5 7 1. for dual output versions, delete a from part number and split current equally between outputs. notes dimensions in inches (mm) weight: 0.009 lbs (4.3 g) tolerance: 0.010 (0.25) pin diameter: 0.020 x 0.012 (0.50 x 0.30) pin tolerance: 0.004 (0.10 mm) notes pin single dual 1 +vin +vin 2 -vin -vin 5 0 v -vo 6 no pin 0 v 7 +vo +vo recommended footprint top view grid: 0.1 x 0.1 in (2.54 x 2.54 mm) diameter: 0.39 (1.0 mm)
|